I just had my engine light code read at the parts store 2003 ranger 5 speed 4x4 4.0
The parts store said the code is c 1095 Hydro pump circuit malfunction which I know nothing about. I also have had issues for a few years with the ABS light and abs seemed to malfunction so I pulled the abs fuse out and did not have problems until now , I also got a P0442 EVAP code and replaced the vent valve and cleared the code but it came back about 80 miles later along with this new c1095 code.
Any opinions would be treasured.

__________________
2003 Ford Ranger 4x4 Edge extended cab 4.0

https://www.yourmechanic.com/article...by-parker-hill

__________________
1998 Ranger XLT Super Cab 4.0 ohv v6 - 5r55E automatic Trans - 8.8 with 3.55gears - Toreador Red Clear Coat Metallic -Explorer Sport Trac White Faced Gage Cluster -2006 Mirror Swap-16" Mustang wheels with 215-65-16" Falken Tires

Tx
Thanks for the link, I did have the bearings and sensors replaced and serviced about 25,000 miles back. The electrical connections look good and the fluid level was the first thing I checked. I will look at the sensors on the wheels which were cleaned up a few years ago and this truck has not been off road in the last 10 years so I 'am starting to suspect the HCU motor itself, it is not giving an ABS light, but is giving a CEL which could just be from the P0442 which is my other code, I did replace the canister purge vent valve but still got a P0442 code.

__________________
2003 Ford Ranger 4x4 Edge extended cab 4.0