Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!
FRF Store Register Ranger Pictures Community Today's Posts Search

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-01-2018, 11:02 AM
Karetaker Karetaker is offline
Like the Forums
 
Join Date: Nov 2011
Posts: 34
Default Starter Problem???

A few months back I went to start my truck and it didn't start. I shorted the signal wire on the starter to 12v. It would whine as if it was spinning but not engaging the flywheel. I tried everything with the same result when shorted. So, I replaced the starter in the parking lot of a bar on a Friday (working not drinking). Since I have replaced the starter so many times in this vehicle the signal wire was too short to cut and splice on the new signal wire. I spliced onto part of the wire that came with the last starter. I wasn't real comfortable with the splice. But, the truck fired up so I assumed all was well.

A few weeks ago I pulled into a mini market and when I came out the truck wouldn't start. Just like the first time it wouldn't turn over with nothing out of the starter. I screwed with it for a while then moved the signal wire a little. I got back in the truck and it fired up. The next day I pulled all the wires off the starter and clean them all good. Then I cut off all the old signal wire and added some more wire to it of the same gauge. I got a good solder on both ends and put heat shirk over it. Since then there was one time when I started the truck where the starter cut off for about half a second while turning over. Then today I was at a location and got in the truck turned the key and nothing. I shorted the signal wire to 12V and it whined as if turning but didn't engage the flywheel and crank over. The second time I did it the truck turn over and started.

Thoughts?
__________________
98 Ranger 4.0 with a 2000 Explorer engine
Reply With Quote
  #2  
Old 08-01-2018, 11:53 AM
RoberticusMaximus RoberticusMaximus is offline
<<< Husky the High Dog!
 
Join Date: Jan 2012
Posts: 7,181
Default Re: Starter Problem???

when it whines but doesn't turn engine over, that sounds like the solenoid isn't pushing the bendix out. or there's a missing tooth on the flywheel, that'll do pretty much the same thing. just a couple thoughts, which don't explain the whole issue sounds like lol

edit: if the solenoid is sticking and not engaging the bendix to flywheel, usually you can crawl under there and tap on the side of the starter a few times and it will let go for you the next time you turn the key over
Reply With Quote
Reply



Similar Threads
Thread Thread Starter Forum Replies Last Post
starter problem rsantaniello 4-Cylinder Tech 33 07-02-2014 06:01 AM
starter problem Morehous Electrical Tech 11 02-11-2014 10:23 PM
Starter Problem? rmilo198 4-Cylinder Tech 10 10-21-2013 06:09 AM
starter problem ejason Electrical Tech 5 06-10-2013 07:56 PM
Starter Problem on my 01 blue01 Exterior Tech 1 04-03-2013 12:35 PM