Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-07-2018, 09:38 AM
Neophite Neophite is offline
Learning to use the forums
 
Join Date: Nov 2016
Posts: 2
Question 4.0 L Harmonic Balancer removal

I can't find a Balancer removal kit with the correct bolts to fit my Balancer. What size bolt and thread is required?
2003 4.0 L
Reply With Quote
  #2  
Old 03-08-2018, 08:01 PM
mulisha85 mulisha85 is offline
Learning to use the forums
 
Join Date: Mar 2016
Posts: 13
Default Re: 4.0 L Harmonic Balancer removal

Not sure what size i would have to look for them. But i also had the same problem with my 03 4.0l sohc. I rented the kit from autozone but the bolts were to short so i took one of the bolts to lowes and bought 2 much longer ones. Just take the ones that barely fit and get longer bolts at lowes. Just chack the thread with the thread checker at lowes.
__________________
What's up everyone! Im new to this site but I would like some feedback on my truck. I have a 03 4.0l v6 4wd ranger edge and am looking to level the front out and was just going to go for the torsion key lift but was told they are bad on the ride and suspension. So they say spindle lift is the way to go but I can't seem to find spindle lift for the 4wd any help would apreciate it on what's the best way to go.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 Ranger 3.0L Harmonic Balancer Removal jnbdykema 3.0 Vulcan Tech 4 01-18-2017 10:53 AM
Harmonic balancer Castleguard General Tech 4 05-04-2016 08:04 PM
Harmonic balancer removal bcostanza62@gmail.com 3.0 Vulcan Tech 4 03-14-2016 09:24 AM
key for the harmonic balancer wangbungal 3.0 Vulcan Tech 0 12-31-2012 05:57 PM
Harmonic Balancer removal !!!!! Waynoblaster 4-Cylinder Tech 2 10-27-2012 06:38 AM