Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-04-2018, 06:48 AM
Mailman1 Mailman1 is offline
Ford Ranger Owner
 
Join Date: May 2012
Posts: 71
Default 99 4.0 OHV head

I went to put my new Pro Max Performance head on yesterday and could not seem to get it to fit down over the pilot pipes which are on each end of the engine block and that the OD of the pipes were 15.33 and the holes on the head were 15.25 which will not allow the head to fit flush with the block. Is it possible to say take it to a machine shop and have them enlarge the holes so it will fit. Has anyone else had this problem lately with Pro Max?
__________________
1999 Ranger 4.0 OHV, xlt, 4x4, auto,
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: 2.3 Duratec Head Gasket Set and Head Bolts tenro Engine & Drivetrain Parts 3 03-12-2017 09:46 PM
1994 Ranger head is off need opinions on condition of head mpp313 4-Cylinder Tech 3 01-25-2016 10:03 AM
2.9 Blown Head Gasket and/or Damaged Head? tcbaklash 2.9 Liter Tech 9 06-12-2015 08:09 AM
1996 ranger. Possible head/head gasket issues. birdman3131 4-Cylinder Tech 1 03-13-2015 07:44 AM
Blown head gasket or warped head? Chris K-UT 3.0 Vulcan Tech 23 01-19-2015 07:11 AM