Quote:
Originally Posted by jeff1971
ok getting spark and gas thuoght it was a gremlin or computer in my 1993 4.0 xlt 4x4 manuel so replaced the eec and put in upper harness from eec plug in down to transfer case still no start i take off the positive
battery cable and put test lght in between the battery post an positve wire it light up so does that mean i have a bad ground help!!!!
|
So try this; Put it back as you had it, take it OUT of gear AND STAND ON THE DRIVERS SIDE FENDER WITH NO ONE IN FRONT OF THE TRUCK OR FACING INTO A WALL/CAR PLEASE!! Jump the terminals with the handles of a pair of slip joint pliers from the starter solenoid on the drivers side fender.
if it kicks the starter, you have a break in a wire from the battery to the solenoid. Test and report back please...