Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 04-17-2017, 01:32 PM
2004rangervs_mustang91 2004rangervs_mustang91 is offline
Learning to use the forums
Join Date: Apr 2017
Posts: 1
Angry Any help!?!? Truck won't start

I recently done a clutch job on my truck. Whenever I put everything back together it worked fine for a while and the starter bolts came loose. I put the starter bolts back in and start around for a little bit and then started making a grinding/clinking noise. Then I rebuilt the starter with one out of a manual explore with the same motor and use the old housing. That starter didn't last very long at all. Now my truck will not start with the starter and if I will start it it seems to lose oil pressure and die didn't do this before and I don't know what is causing it
Reply With Quote

flywheel, locked up, oil, starter

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Truck won't Re-Start hot...but will start hours later? WTF? 02Edge 3.0 Vulcan Tech 31 12-27-2013 05:24 AM
My truck won't start eddieb1983 Electrical Tech 4 07-17-2013 04:00 PM
alarm won't shut off, truck won't start madamom Electrical Tech 3 04-04-2010 08:25 PM
Truck won't start KHARPS Electrical Tech 10 01-08-2010 12:49 AM
Truck won't start in park... and won't engage into Drive Steve G. Drivetrain Tech 3 08-29-2009 06:41 PM