Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-18-2010, 05:47 AM
bluscsw bluscsw is offline
Learning to use the forums
 
Join Date: May 2010
Posts: 2
Default 4.0 heating/cooling question

Recently while driving my Ranger, I noticed that warm air (more towards the hot range) was coming from the panel vents. The outside air temp was in the 60's, the fan was selected off, the temp selection was set to full cold, and the floor/vent/defrost selector was set to off.
I know the a/c does not work, and that was off as well. Everything was selected off and I still get some pretty warm air coming thru the panel vents! I verified the engine was showing normal temperature and nothing else appeared to be out of the ordinary. Pleas advise as to what I should be looking for or what problem this may be indicating. Thanks in advance.
Reply With Quote
  #2  
Old 05-18-2010, 06:05 AM
FireRanger FireRanger is offline
Blinded by the light
 
Join Date: Sep 2009
Posts: 7,674
Send a message via AIM to FireRanger
Default Re: 4.0 heating/cooling question

Hard to diagnose since you haven't told us what you're driving...
__________________
(Formerly)
FireRanger
2003 Edge 4.0 4wd

How to: Aux light wiring, relays, & fuses
Info: 300+ intake threads here on FRF
Info: HID Projectors
How To: NO HEAT Troubleshooting Guide
Reply With Quote
  #3  
Old 05-18-2010, 06:12 AM
bluscsw bluscsw is offline
Learning to use the forums
 
Join Date: May 2010
Posts: 2
Default Re: 4.0 heating/cooling question

I'm driving a 1994 Frord Ranger, with a 4.0 V6. It has the extended cab, 4 wheel drive, 5 speed manual transmission.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2009 Ranger AC and Heating controls Gloria General Ford Ranger Discussion 10 02-12-2012 05:16 PM
cooling DEBO 3.0 Vulcan Tech 0 04-01-2010 07:48 PM
over heating problem... Please Help! nwisby 4-Cylinder Tech 5 03-24-2010 10:23 AM
Entire heating system install jahylton General Tech 0 02-01-2010 10:46 PM
How to Improve Cooling? utahpredator_7 2.9 Liter Tech 13 12-20-2009 10:46 PM