Speedo not working is killing me.... - Page 2

03RangerFX4 · #16 04-18-2014, 08:12 AM

Check fuse 11 on side of dash. That control speedo and odometer.

sstaten69 · #17 04-18-2014, 06:27 PM

Quote:

Originally Posted by 03RangerFX4

Check fuse 11 on side of dash. That control speedo and odometer.

Did that it was good until I cleaned out the plug to the abs sensor, changed and still nothing...

03RangerFX4 · #18 04-19-2014, 06:39 AM

[QUOTE="sstaten69;2112656"] Did that it was good until I cleaned out the plug to the abs sensor, changed and still nothing...[/QUOTE
Check all your connections again. Otherwise I don't know what it would be. Good luck on getting it fixed.

nw420 · #19 04-19-2014, 07:23 AM

[quote=03RangerFX4;2113067]

Quote:

Originally Posted by sstaten69

Did that it was good until I cleaned out the plug to the abs sensor, changed and still nothing...[/QUOTE
Check all your connections again. Otherwise I don't know what it would be. Good luck on getting it fixed.

sstaten69 · #20 04-20-2014, 07:28 PM

Check all your connections again. Otherwise I don't know what it would be. Good luck on getting it fixed.[/QUOTE]
That is what I'm going to try that's what its got to be. something simple. Some say if that's not it could be the abs module. I don't understand when I sprayed cleaner in it the #11 fuse blew so thinkin that its getting power so guess it could be the module..???..

Robramrod · #21 04-20-2014, 09:25 PM

Could be the speedometer servo motor failed but I'd think that would throw a dtc

sstaten69 · #22 05-13-2014, 01:25 PM

Okay it is working know.
Just a recap of what I did.
Replaced the fuse. Nothing
Replaced the abs speed sensor in the rear end. Nothing
Replaced the trans output sensor. Nothing
Checked and cleaned the plug under the cab. Nothing
Replaced the cruise control release switch. Nothing
Replaced the A.B.S control module. Nothing
Changed the speedo cluster, with a tach. Nothing.
Ok after giving up and getting ready to put the for sale sign on it I started to put the radio back in when I seen a bunch of straw wrappers that a mouse had made a home cleaned them out and to my amazement there was 2 wires ate in half the green/black and gray/black both go to the ecm. The same colors for the speed sensor in the rear end. Soldered and heat shrink and bam it works. Man I would of never seen them if I hadn't taken the radio out to get to the abs module. Almost hate to put the stock radio back in but that's for another day.