Re: Ball Joint Replacement Question
Quote:
Originally Posted by velozp
Im confused guys. Both NAPA , Rock Auto, and Autozone sell individual upper ball joints for coil spring suspenion for my 99 2wd ranger. They tell me it will fit the original control arm. All I have to do it press the old one out and press the new one in. I am in the process of taking the control arm out of my ranger.. Any help??
|
on 98, 99 and 2000 you should be able to just replace the upper ball joint. it should have a snap ring on it?.......
----------
Quote:
Originally Posted by velozp
Im confused guys. Both NAPA , Rock Auto, and Autozone sell individual upper ball joints for coil spring suspenion for my 99 2wd ranger. They tell me it will fit the original control arm. All I have to do it press the old one out and press the new one in. I am in the process of taking the control arm out of my ranger.. Any help??
|
start a new thread and you will get a lot of good advice........
if you remove the upper control arm to replace the BJ drive the truck right to an alignment shop or you will destroy your tires
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)
2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Last edited by modelageek; 04-01-2011 at 11:24 AM.
|