View Single Post
 
Old 03-25-2011, 03:27 PM
pooleo pooleo is offline
Ban Survivor. (x2)
 
Join Date: Jun 2010
Posts: 6,764
Default Re: Kenwood deck help

sometimes there are "smart cables" the plug into the deck and into the factory wiring. In most cases, there is just the harness that plugs into the factory harness that will have: RED YELLOW BLACK. PURPLE/PURPLE WHITE. GREEN/GREEN WHITE. GREY/GREY BLACK. WHITE/WHITE BLACK.

The harness that comes with your deck has these same colors. Just match colors from the two harnesses. Plug in and done.



----------

heres mine I installed a few months ago. I have a kenwood deck also. Heat shrink butt splice are the way to go!

----------

Notice on the deck side harness is to blue wires. blue and blue white. One is for power antenna, the other is remote power. Connect your amp wire to the power antenna. Theres also a mute and dimmer wire. I did not hook those up.
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
Reply With Quote