Quote:
Originally Posted by 125ranger
My 6k HID lo/hi (all in one bulb) are stuck in high beams. The dash icon has a dimmed high beam, and when I flip high beams on they brighten up some. My lights are always stuck on high.
I just bought the 6k HID lo/hi, before I had 6k lo beams. One of the new ballast's do not work. So I'm using a ballast from my 6k lo beam.
The only difference of the two are the new ballast have 10a lin max. My 6k lo have a 5.5a lin max. Is this why my lights are stuck on high?
I have made sure I have good ground, and good connections. I also have after market headlight houseing's.
|
Sounds like you may have the high & low wires mixed up.
Quote:
Originally Posted by Hitman1490
I have a question about hid. I recently bought a high and low set of hids for my truck. But do i need another pair? so i have hid high beams and hid low beams? I have a 1998.
|
Quote:
Originally Posted by GGlighting
HID hi/ Lo kit should have come with a relay harness that you need to
Wire in. Your hi and Lo beam are both in the same bulb
|
Not necessarily. There are two kinds of hi/lo kits advertised. One uses a HID low beam, and a halogen bulb. The other uses a single HID bulb for both.
So to answer the question, no you do not need another pair, you just need to ensure you buy the appropriate kit.
Quote:
Originally Posted by GGlighting
Some kits to stay away from when purchasing:
1: eBay kits
2: Xentec
I have heard NOTHING but bad reviews about both of these kits
|
I've ran an eBay HID kit for years on my truck with no problems, I know many people on this forum (as well as other forums) would say the same thing.