Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 08-09-2013, 04:11 PM
mloyd mloyd is offline
Learning to use the forums
Join Date: Aug 2013
Posts: 1
Default Low input to TPS and MAF

Hello. My truck has been having idling problems, but only right after I start the engine. When I press the gas pedal it sounds like it is going to die. After about ten seconds the idle drops really low and then goes back to normal. Once that happens it runs just fine. Right now it is showing codes P0102-MAF Sensor Circuit Low Input and P0122-TB Sensor Circuit Low Input. I have cleaned the MAF sensor and IAC valve and changed the air filter. I am a newbie when it comes to working on my truck so I need help. What else could I do to solve this problem? Thank you.
1997 V6 3.0L Splash
174,000 miles
Reply With Quote

idle, low input, maf, tps

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tps JJcrago05 General Tech 2 04-23-2012 05:06 PM
Where's the TPS on my 2.3? stephano 4-Cylinder Tech 22 04-21-2011 05:53 AM
MAF or TPS or something else? Doctor Wily 4-Cylinder Tech 12 02-14-2011 07:17 PM
tps help silverfoxvtx General Tech 3 02-21-2010 10:54 PM
Tps?? milkman Electrical Tech 9 08-23-2009 11:39 AM