i have a 93 ford ranger 3.0 v6, i was driving home the other night and my truck all of a sudden started misfiring, well the ecu wont tell me anything because there is no check engine light (OBD I), i have replaced the plugs, wires, cap, rotor button, ignition coil and still no luck is there something i am missing??? thanks in advance

you missed the fuel system. check your pressure at the shrader valve. you should have about 40. also if you are not sure about the fuel filter you should change it

__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).

i didnt even think of that but the fuel filter would cause it 2 do that???

i forgot 2 mention when my truck started misfiring my girlfriend who was following me in her car said that my exhaust smelled like raw gas???

you should check for codes even if the cel is not on

__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).

i tried the code reader said it was unable 2 control high/low rpm during test i tried 4 times