Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-08-2010, 07:08 AM
bob-ranger bob-ranger is offline
Learning to use the forums
 
Join Date: Feb 2010
Posts: 1
Default Flex fuel

I have a 1999 ranger 3.0 flex fuel and have a flex fuel sensor code.
I was about to change the sensor when I checked the voltage at the wires.
I have read that I should have 12 volts on one wire, 5 volts to a 2nd and the 3rd is ground.
I have 12 volts to 2 and the 3rd is ground.
any help would be appreciated.
Thanks
Bob
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
3.0 flex fuel egine swap postup610 8-Cylinder Tech 2 11-29-2009 07:07 AM
Sorry if this is in the wrong forum. How do I tell if I have flex fuel 3.0 worldclasssniper 3.0 Vulcan Tech 16 11-11-2009 01:03 PM
3.0L Flex Fuel 6 cyl - tow capacity hmcqueary 3.0 Vulcan Tech 3 10-30-2009 11:13 AM
Lockign Gas Cap 3.0L flex fuel hmcqueary 3.0 Vulcan Tech 3 10-26-2009 12:53 PM
99 v6 3.0 flex new fuel filter jim22 General Tech 1 08-22-2009 07:42 PM