So i managed to flip my ranger on its side.. but not too bad. The body actually came out looking not to banged up but thats not the problem. After i got it towed home i waited a couple hours to try to crank it over so if there was oil in the cylinders i wouldn't hydro-lock it. I cranked it over and all went good but it wouldnt start.. So i got curious and took my intake tube off and discovered oil so i then went on and took the top part of the intake manifold off and drained all the oil from it and reinstalled it. I tryed again to start it and nothing. I then went and filled a spray bottle with gas and sprayed some gas into the intake and started it and it ran for about three second, just enough to burn that gas up and i noticed a bunch of burnt oil coming out the exhaust which was expected. I kept doing this for about half an hour hoping to burn all the oil out and have it run on its own. The problem is i cant seem to get it to run on its own. Any suggestions on what to do next?

Your fuel intertia switch is triggered.

--1993 ford ranger ext cab 3.0 v6--

__________________
1993 ford ranger 3.0 v6