Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-02-2012, 10:13 AM
I<3RANGERS I<3RANGERS is offline
Learning to use the forums
 
Join Date: Jul 2012
Posts: 7
Default Too much fun..

So i managed to flip my ranger on its side.. but not too bad. The body actually came out looking not to banged up but thats not the problem. After i got it towed home i waited a couple hours to try to crank it over so if there was oil in the cylinders i wouldn't hydro-lock it. I cranked it over and all went good but it wouldnt start.. So i got curious and took my intake tube off and discovered oil so i then went on and took the top part of the intake manifold off and drained all the oil from it and reinstalled it. I tryed again to start it and nothing. I then went and filled a spray bottle with gas and sprayed some gas into the intake and started it and it ran for about three second, just enough to burn that gas up and i noticed a bunch of burnt oil coming out the exhaust which was expected. I kept doing this for about half an hour hoping to burn all the oil out and have it run on its own. The problem is i cant seem to get it to run on its own. Any suggestions on what to do next?
Reply With Quote
  #2  
Old 08-02-2012, 11:54 AM
Stinkbaitj Stinkbaitj is offline
potential sarcasm poster
 
Join Date: Nov 2011
Posts: 2,464
Default

Quote:
Originally Posted by I<3RANGERS
So i managed to flip my ranger on its side.. but not too bad. The body actually came out looking not to banged up but thats not the problem. After i got it towed home i waited a couple hours to try to crank it over so if there was oil in the cylinders i wouldn't hydro-lock it. I cranked it over and all went good but it wouldnt start.. So i got curious and took my intake tube off and discovered oil so i then went on and took the top part of the intake manifold off and drained all the oil from it and reinstalled it. I tryed again to start it and nothing. I then went and filled a spray bottle with gas and sprayed some gas into the intake and started it and it ran for about three second, just enough to burn that gas up and i noticed a bunch of burnt oil coming out the exhaust which was expected. I kept doing this for about half an hour hoping to burn all the oil out and have it run on its own. The problem is i cant seem to get it to run on its own. Any suggestions on what to do next?
Your fuel intertia switch is triggered.

--1993 ford ranger ext cab 3.0 v6--
__________________
1993 ford ranger 3.0 v6
Reply With Quote
Reply

Tags
flipped, gas, intake, oil, rolled

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
out having some fun lovemud Vehicle Snapshots 17 10-18-2011 08:20 AM
now this is fun lovemud Vehicle Videos 0 10-15-2011 11:08 PM
Fun Maintenance for the weekend...advice..(Trans/Fluids/FUN). Truckdup 3.0 Vulcan Tech 0 09-27-2011 01:28 PM
Replacing Clutch... Fun Fun... tkienzle Drivetrain Tech 3 02-23-2011 06:51 AM
mm these would be fun 94_blk4x4 Off Topic 14 09-24-2009 06:07 AM