Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-04-2011, 06:55 PM
Navdawg Navdawg is offline
Like the Forums
 
Join Date: Oct 2011
Posts: 36
Default Compression numbers

Compression

1st bump 3rd bump
1 130 190
2 160 195
3 120 195
4 130 185
5 140 195
6 120 195

Remote starter used, all plugs pulled, engine warmed up and I did each cylinder at least three times to make sure what I was getting was consistant. 1st bump on all cylinders was quick, then after two more that was about max. This was continous as I could watch the gage.

The heads were rebuilt about 15K miles ago. Misfire is in #2. With these numbers can is still be an exhaust valve.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
compression test tonyjklh 4.0 SOHC / 4.0 OHV Tech 1 04-20-2011 03:50 PM
One cylider low compression CesiumClockTech 4-Cylinder Tech 4 04-18-2011 10:47 AM
compression test questions danielwd General Tech 1 12-28-2010 07:12 AM
Compression test on '89 - 2.9L art47 2.9 Liter Tech 3 10-20-2010 07:22 AM
compression odesti 4-Cylinder Tech 0 07-20-2010 12:45 PM