Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #16  
Old 07-24-2011, 02:15 PM
budgetliftedranger budgetliftedranger is offline
Attack of the 2wd!
 
Join Date: Jul 2011
Posts: 73
Default Re: #6 imjector missfire?

Nice, i got rebuilt flowmatched injectors off ebay for 80$! Im sure they will help a lot... I drove to ionia for the fair over the weekend and the injector kicks on and off till ive been on the highway for about 15 miles then it runs great, i got about 25 mpg highway...
__________________
98 ranger 3.0 200k+ miles, Bedliner paint w/ 3 inch body lift, 31" Goodyears, Custom exhaust w/ headers, Rollbar and brush gaurd, CUSTOM DENTS!
Reply With Quote
  #17  
Old 07-27-2011, 09:54 AM
day004 day004 is offline
Like the Forums
 
Join Date: Oct 2010
Posts: 49
Default Re: #6 imjector missfire?

Quote:
Originally Posted by HazardousRanger View Post
^^ it might make more sense to spell sense right
It was a play on words.

Your sense of humor has been noted!
Reply With Quote
  #18  
Old 08-01-2011, 02:22 PM
mt1986 mt1986 is offline
Learning to use the forums
 
Join Date: Jul 2011
Posts: 12
Default Re: #6 imjector missfire?

check the electrical connection at the injectors for corrosion if its dirty it will throw things all out of whack check all of them they tend to get crud in there similar to dirty battery cables i used PB blaster and a toothbrush to clean mine just be sure to use dielectric grease when going back together with the connections, good luck
__________________
mt1986
Reply With Quote
  #19  
Old 08-03-2011, 07:15 PM
budgetliftedranger budgetliftedranger is offline
Attack of the 2wd!
 
Join Date: Jul 2011
Posts: 73
Default Re: #6 imjector missfire?

well i found out its the camshaft position sensor... Ive already replaced the sensor and synchronizer once already, i looked at the sensor and it still looks brand new and the magnet isnt loose... i tried realigning it to 0, 5, and 10 before tdc and it runs fine till u put it in drive and then at low speeds it gets rough, i got the battery unhooked right now so idk if that was the problem. Its at 0 btdc right now, im still gonna install the new injectors this weekend and clean the connectors.
__________________
98 ranger 3.0 200k+ miles, Bedliner paint w/ 3 inch body lift, 31" Goodyears, Custom exhaust w/ headers, Rollbar and brush gaurd, CUSTOM DENTS!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cylinder 4 missfire and lean Kink2227 4-Cylinder Tech 7 08-15-2015 12:39 PM
Cylinder Missfire schumungus 3.0 Vulcan Tech 3 03-17-2012 05:57 PM
Spuddering/missfire 407Ford 3.0 Vulcan Tech 1 06-19-2011 04:16 PM
missfire in # 2 (95-B2300) cybrk 4-Cylinder Tech 0 08-31-2010 04:29 PM
Cylinder 6 Missfire code RangerSteve 3.0 Vulcan Tech 0 02-12-2010 11:42 PM