Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 06-26-2011, 09:21 AM
Steve o Steve o is offline
Cool place :)
Join Date: Jun 2011
Posts: 5
Send a message via Yahoo to Steve o
Default 03 3.0 flex fuel cylinder 5 misfire fixed now 4 misfire error

Hi guys
i have 03 3.0 flex fuel with 100k

Ok had a error code misfire #5 cylinder mechanic just did the injectors so
I replaced coil pack, plugs an wires ran fine for 2 days on way to work last night engine light blinked felt loss of power so when i got to work i plugged my reader in an now error code for cylinder#4
I checked for loose wires all tight i know plugs all gaped right
I have searched the forums and i am a bit lost any suggestions where to go from here??
I have looked at the wiring going to the coil pack cant find anything wrong with it so i am thinking sensor??
any help would be greatly appreciated

ok on way home from work i baby-ed it had no problem felt no power loss or shaking when i got home plugged reader in there was no codes or errors. i checked everything again. it all looked ok
So took it for a drive got on the freeway on ramp see if it would do it again and when the RPM get above 3000 engine light flashes and i get the error.
Hope that helped some
Thanx Steve o

Last edited by Steve o; 06-27-2011 at 05:56 AM. Reason: update
Reply With Quote
Old 09-02-2011, 06:00 PM
scheider1980 scheider1980 is offline
Ford Ranger Owner
Join Date: Nov 2009
Posts: 63
Default Re: 03 3.0 flex fuel cylinder 5 misfire fixed now 4 misfire error

My dose the same think it 2006 ford ranger 3.0 I do not no what to about it
Reply With Quote
Old 10-04-2011, 06:19 PM
bondojr bondojr is offline
Learning to use the forums
Join Date: Oct 2011
Posts: 6
Default Re: 03 3.0 flex fuel cylinder 5 misfire fixed now 4 misfire error

I have a 2004 ranger Edge w/3.0 at 110,000 miles. Just bought it last year w/about 100,000miles. Shortly after purchase, I started getting the cylinder misfire codes, multi cylinder misfire code & misfire v1000 revs. I then noticed a plug wires had been changed & previous owner claimed No Knowledge of MIL codes. The codes will not reset/clear for more than 10 miles. Runs fine on open road but in city traffic or sitting idle it will begin to misfire & ck eng light flashes (wanting to stall from stops) Rev eng to 1500 rpm helps eliminate the misfiring. I've heard of the TSB for this problem & that it is a manuf head alignment problem from the build. I'm lookin for money for another engine!

If you find anything out, please share!!!
1994 Ranger XLT 3.0 auto w/+250k
2004 Ranger Edge 3.0 man w/110k & major MIL misfire issues!
'jack knife' tri-mechanic - (I try to fix it first!)
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
cylinder 5 misfire brendaprz General Tech 5 08-06-2011 04:20 PM
2003 3.0 flex fuel cylinder 5 misfire 97k miles aldavidsonjr 3.0 Vulcan Tech 2 06-29-2011 07:07 AM
Cylinder misfire help Gum85 4-Cylinder Tech 20 03-08-2011 02:09 AM
cylinder 3 misfire smurphy Electrical Tech 1 03-29-2010 08:05 AM
MISFIRE in Cylinder 6 RangerSteve 3.0 Vulcan Tech 3 02-08-2010 05:58 PM