Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-10-2011, 01:27 PM
crackporcupine crackporcupine is offline
Learning to use the forums
 
Join Date: Aug 2011
Posts: 11
Question Air to lean

I installed a K & N cold intake system three years after purchasing my 04 ford ranger edge 3.0 5 speed manual. About a month after installing I got an engine light and when I had it read it was something about air to lean in bank 1? I don't remember the specific code and am going to auto zone today to have it read again for the code. I took the air flow sensor out and cleaned it with air flow sensor cleaner and it did nothing. I paid some a##holes 300 dollars for them to tell me I had dirt in my intake and they cleaned it out and they said it was fixed... A few months later it came back on. I'll repost the code after I get it on my way home from work today.

Has anyone heard of this happening or has anyone had the same problem before??
__________________
04 Edge Supercab 2wd 3.0 Vulcan 5 speed manual

mods k & n intake system, single pipe flowmaster, pioneer door and rear speakers with 2 10 in subs.
Reply With Quote
  #2  
Old 08-10-2011, 03:05 PM
crackporcupine crackporcupine is offline
Learning to use the forums
 
Join Date: Aug 2011
Posts: 11
Default Re: Air to lean

Yep, went to auto zone and it's still the MAFS code coming up. I've got two options here I think.

1: Take the Danger Ranger to Ford and have them reflash the computer for 95 bucks?

2:Replace the MAFS and hope the old one was bad for 85 bucks?
__________________
04 Edge Supercab 2wd 3.0 Vulcan 5 speed manual

mods k & n intake system, single pipe flowmaster, pioneer door and rear speakers with 2 10 in subs.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cylinder 4 missfire and lean Kink2227 4-Cylinder Tech 7 08-15-2015 12:39 PM
3.0 bank1 lean code please help fomospede 3.0 Vulcan Tech 4 01-29-2011 07:48 AM
is this a normal lean? FX4 Suspension Tech 12 06-27-2010 03:13 PM
Running Lean-Whats normal? RangerSteve 3.0 Vulcan Tech 9 02-28-2010 07:40 PM
95 ranger lean.. camkos Suspension Tech 14 06-19-2009 07:19 AM