I have a squeaky noise in the truck, I have oiled most parts changed all ball joints, and it keeps squeaking. Any suggestions??

lolz man try checking frame body mounts especially everything on the rear bed,didn't check to see what year you have but seems some rangers have frame,body hangers that can sqeak and moan mine does in extreme temp,change. if it's mechanical,keep looking you'll get it.

__________________
1987 black custom xlt,ext. cab 4x4,military-surplus 2.9L, stock 3"lifted;5 speed auto trans w/ manual 4x4,borg-Warner-turbo transfer case,grinds out progressive aluminum mags w/goodyear wranglers; keyed entry alarm,duel 280w interface deckw/usb n bluetooth,jvc6x8s rear,jvc4"160wfront,crome bed side rails,tuff liner bed liner also blacked out headlights,limo black window tint. called the BULLSNAKE cuz its the best small-n-toughest 4x4 ford built!!

Wheres it comming from?

Its a truck. If you want a smooth sqeak free ride buy a boat. :/ J/k My shit has done that forever and it still gets me to work.

Try A arm bushings, ball joints (which I see you already have, make sure you replace them ALL, upper and lower) just go through the front end and change bushings, grease ball joints if they have a grease fitting, etc. You'll find it.

I finally found mine after two months and it ended up being a ball joint.

dunno what year truck you have but I had a squeek and it turned out to be bad radius arm bushings

__________________
1993 Ford Ranger Ext. Cab | stepside | 4x4 | 4.0L | Lifted | 35" BFG KM2s | MT Classic IIs | Dana 35/Disc 8.8 with 4.56's | Duals | Etc

RIP JASON