Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 07-20-2017, 10:59 AM
cjweaver13 cjweaver13 is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2011
Posts: 15
Default Gas Filler Neck length/part number

I have a 1998 extended cab 2 door with a stepside bed. Are all filler necks universal? If not, any idea what length neck or even part number I need? Thanks for the help. Advanced auto has one near me and their site says it fits, but I've learned to be cautious about this.

https://shop.advanceautoparts.com/p/...909/22972782-P
Reply With Quote
  #2  
Old 07-20-2017, 01:19 PM
WVJefo WVJefo is offline
Ford Truck Driver
 
Join Date: Feb 2017
Posts: 86
Default Re: Gas Filler Neck length/part number

Filler necks are not universal. Just replace the outer filler hose on my 95 stepside and filler assembly is different than yours.

It you can get under the truck and check out the tube in place. It will give you an idea of size & type. Use a tape measure if you can.

You may have to lift the bed to get to remove & replace the filler neck.

Also if you are not doing this right away go to rockauto.com. Price is much cheaper.
__________________
Jeff

Weirton WV
1995 Ranger 3.0 Splash 3.73 limited slip.
Reply With Quote
  #3  
Old 07-20-2017, 02:55 PM
RAT Ranger RAT Ranger is offline
Ford Ranger Driver
 
Join Date: May 2009
Posts: 1,411
Unhappy Re: Gas Filler Neck length/part number

XL5Z*9034*GB

DISCONTINUED by Ford and when it was available, it was $412 + tax. and I don't know of anybody repoppin them. SORRY!
__________________
ALL THROTTLE, NO BOTTLE!!!

Daily Driver: 98 Thunderbolt

TOY: Green 94 Pro Street
Reply With Quote
  #4  
Old 07-20-2017, 04:06 PM
Birchhatchery Birchhatchery is offline
Ford Motor Company
 
Join Date: Mar 2011
Posts: 131
Default Re: Gas Filler Neck length/part number

buy it from rockauto it save you a hundred dollars I just did this to my 97 2 days ago and while I had the bed off I put in a new fuel pump. no they make them for regular bed and stepside
Reply With Quote
  #5  
Old 07-24-2017, 06:04 AM
cjweaver13 cjweaver13 is offline
Liking the Ford Ranger Forum
 
Join Date: Feb 2011
Posts: 15
Default Re: Gas Filler Neck length/part number

Thanks for the replies. I ended up getting one at advanced auto with coupon and it fit. It was easy enough to install without removing the bed or anything. Only bad part was the hose clamps were completely rusted, so I ended up using a pair of vice pliers and broke them loose. All said and done, $100 and 30 minutes of work and an hour drive after enabled me to get it inspected and passed.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
filler neck recklessranger97 General Tech 2 05-22-2013 05:56 PM
filler neck ThatUPSGuy General Tech 14 02-21-2013 02:03 PM
filler neck Marine513 General Tech 3 11-04-2012 07:56 AM
For Trade: 2004 fuel tank filler neck trade for 2003 fuel tank filler neck cslb81 Trucks 0 04-02-2012 11:09 AM
96' Filler Neck sofireguy 4-Cylinder Tech 1 05-10-2011 06:40 PM