Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-05-2017, 12:55 PM
xler8er xler8er is offline
Like the Forums
 
Join Date: Feb 2017
Posts: 37
Default my CEL codes

I reset my CEL last night drove around for a few never came back on... this morning I was leaving for work and before I could even get out the drive way it popped back on so after work I ran to auto zone and oreillys had them both run a test on it and both said the same thing which I'm glad lol auto zones computer said to change the canister purge valve... oreillys just gave me codes..IF this is actually bad would this cause both banks to run lean and make my #6 plug misfire???? about idk 2 or 3 months ago I changed all plugs and wires, new coil pack, oil and filter and also the air filter.... if I remember right before I changed all that I was running lean on bank 2 had my #1 plug misfiring I think there was more but not for sure.....after I changed all that stuff I went back and had them erase the codes since i just changed everything... about a day later cam back with all these....
p0301 cylinder #1 misfiring
p0306 cylinder #6 misfiring
p0174 bank 2 running lean
p1000 DTC ( diagnostic system readiness test not complete)


so somewhere during the m2 or 3 months iv just been driving it I have had codes go away as u can see from the pics (PICS ARE FROM TODAY)


where would you start?
Attached Images
File Type: jpg 20170505_150527.jpg (90.0 KB, 16 views)
File Type: jpg 20170505_150539.jpg (91.5 KB, 14 views)
File Type: jpg 20170505_150547.jpg (98.8 KB, 11 views)
Reply With Quote
  #2  
Old 05-05-2017, 06:20 PM
Grumpa Grumpa is offline
Busted Knuckles
 
Join Date: Mar 2016
Posts: 230
Default Re: my CEL codes

Lean conditions usually dictate a vacuum leak of some nature or lack of fuel. Check for vacuum leaks and you're probably due for fuel filter changing as well. The more info you give, the better people here can help you. Devils in the details. Year, mileage, those sorts of things.
__________________
1995 Ranger XLT 3.0L OBDII
Trans: A4LD (E) 2WD
Rear: 7.5 / 3.45 NL LHD
Tires:GY P235 75/R15 (orig 225 70/R14)
Long Bed, 20 Gal Tank
Up to 229,900 miles
Reply With Quote
  #3  
Old 05-08-2017, 12:39 PM
xler8er xler8er is offline
Like the Forums
 
Join Date: Feb 2017
Posts: 37
Default

It's a ranger xlt 3.0 2wheel drive 5 speed has almost 191k miles... I'm hard on it every once in a blue moon... just changed the oil, oil filter, plugs and wires, coil pack, air filter and topped the tranny fluid off.. all this about a month ago now... I don't what other details there is to give lol
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
odb2 codes with no CEL bigfoot93 General Tech 12 06-13-2014 04:19 PM
CEL codes gcextreme General Tech 12 06-04-2013 03:56 PM
Blinking CEL but no codes? Jeff K 3.0 Vulcan Tech 5 07-01-2012 07:05 AM
multiple CEL codes need help wangbungal 3.0 Vulcan Tech 2 02-10-2011 09:49 PM
10 codes but no CEL? CornFedBeast 4.0 SOHC / 4.0 OHV Tech 8 01-15-2011 03:14 PM