fuel pump / Prime / Boost
So it appears that the priming portion of my fuel pump has quit working when I turn the key to the ON position. Im assuming the Pump is still working due to it starting after it turns over about 10 times. My question is: Is there a separate 12v feed for the "prime" from the "Run" on the pump, or, does the pump use the same 12v feed for both operations. I would rather just change the pump than troubleshoot the entire fuel pump circuit.
Has anyone had this same issue before, and, if so did a pump replacement resolve this issue? Thanks to all......
__________________
2004 Ford Ranger XLT / 4x4
4.0 V6 / Denver, CO.
|