Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-11-2010, 12:35 AM
locotacoma locotacoma is offline
Learning to use the forums
 
Join Date: Jun 2010
Posts: 2
Default cyl#4 misfire

Hey I have a 2000 ranger with a 3.0l in it and I am getting two codes. P0304 and p0402. The truck runs but misses bad on #4 cyl. Checked and there is spark. Havent checked fuel injector yet but I would think that would toss a different code. New plugs, wires and a coil pack did nothing. I checked the old plug and it had hard black carbon covering the electrode. Put a new egr in and nothing. Anyone have any ideas here? I did pull the wire from the plug and no dif in the idol at all. Seems like its not firing to that cyl, but there is spark...??? could this be a timing issue?Any help would be awesome. Thank you
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
4.0 V6 misfire 94Ranger4x4 4.0 SOHC / 4.0 OHV Tech 20 10-12-2010 04:47 AM
3.0L misfire in cyl #3 fdmn65 3.0 Vulcan Tech 4 10-08-2010 06:28 AM
94 4.0l misfire 94Ranger4x4 4.0 SOHC / 4.0 OHV Tech 5 03-28-2010 07:02 PM
Engine Misfire bobgarbados 4.0 SOHC / 4.0 OHV Tech 10 02-11-2010 02:27 PM
misfire GPM03 4-Cylinder Tech 3 09-06-2009 12:19 AM