Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-06-2010, 08:20 AM
battleshipterry battleshipterry is offline
Learning to use the forums
 
Join Date: May 2010
Posts: 3
Default Injectors with the universal blue pintle caps

I have a 93 ford ranger 3.0. I replaced the old broken pintle caps on the injectors. with the Blue universal caps.but they do not seat on the injector all the way. also the bottom O ring and spacer is also not tight(slides up and down the thickness of the O ring).is there a trick to get them to slid on all the way or is this normal.I tried a small socket and light tap to the cap,and they seam to be fully seated.These are the EV1 type injectors.thanks for any help.
Reply With Quote
  #2  
Old 05-06-2010, 06:35 PM
battleshipterry battleshipterry is offline
Learning to use the forums
 
Join Date: May 2010
Posts: 3
Default Re: Injectors with the universal blue pintle caps

Yep the caps are to be seated all the way.they break if you use to much force.but a slight twist and a firm push and they will seat. maybe warming them a little with a hot air gun.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Injectors and mass air flow acroteau 4-Cylinder Tech 16 05-19-2010 10:30 PM
injectors Blackhawk 4-Cylinder Tech 2 01-31-2010 11:39 PM
Universal Trans Pan Drain Plug Question foxbatonrg Drivetrain Tech 2 12-02-2009 10:19 AM
Universal Joint ratherbehiking Drivetrain Tech 2 11-15-2009 01:30 PM
Universal Joint cspeir Drivetrain Tech 0 08-17-2009 08:33 AM