????

__________________
2001 3.0 V6 Automatic "Police Interceptor"
4x4 Off-Road
3" Body Lift
Belltech 6400 Shackles
JBA Headers
Underdrive Pulleys
To Come: Locker-Rear disc conversion-Front Hitch-Line X-Train Horn

well when u open the hood u look right n the middle of everything. it is a little box that sticks out. take a pic of ur engine and ill show u were it is unless u find it

Here ya go

__________________
2001 3.0 V6 Automatic "Police Interceptor"
4x4 Off-Road
3" Body Lift
Belltech 6400 Shackles
JBA Headers
Underdrive Pulleys
To Come: Locker-Rear disc conversion-Front Hitch-Line X-Train Horn

well in the second pic it is the easiest to c. well if ur looking at the pic and u c the red hose (not the air one) go all the way the the left of it and it is right above it. it has the plug going into it and has two tubes on it aswell.

i cropped it and here it is

Thanks!

__________________
2001 3.0 V6 Automatic "Police Interceptor"
4x4 Off-Road
3" Body Lift
Belltech 6400 Shackles
JBA Headers
Underdrive Pulleys
To Come: Locker-Rear disc conversion-Front Hitch-Line X-Train Horn

no problem

The 2nd pic is the DPFE sensor.which is mounted on the Throttle Body. In pic #1 directly to the right of the throttle linkage cover ( the red square looking box) id the EGR valve and on the top is a vacuum line into the top of it.

I have the same issue! Talked with AutoZone and they showed me pic of each. Attached are what they look like. I found the valve on the engine, but not the sensor. The cropped pic looks to be the sensor. Thanks all!

Attached Images

	EGR Valve.jpg (12.9 KB, 13 views)
	EGR Sensor.jpg (43.7 KB, 15 views)

__________________
iJoe80
2001 Red Ford Ranger 3.0 V6
San Antonio, Texas