Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-02-2014, 01:32 AM
ckvl85 ckvl85 is offline
Learning to use the forums
 
Join Date: Jun 2014
Posts: 4
Question 3.0 flashing check engine light and misfire on #6... HELP!

Hi everyone! I'm new to this forum but joined cause I need help! Here is what I have:
Check engine light on, really rough idle after coming to a stop with a cold motor, check engine light flashes when coasting down hill and after stopping at a light or stop sign. Pulled the codes and I have a misfire on startup and misfire on cylinder 6. Fuel trim is going lean.

here is what I've done:
replaced - Injector, spark plug, wires, PCV, Air filter, Cleaned MAF, Heads got redecked by ford a few years back.
check - compression= ok, voltage and resistance to injector = ok

Anyone have the same issue? or a clue why I am having issues? I keep throwing parts at it and am wrecking my brain on what it could be causing these problems. I'm due for smog and registration so I'm stressin about that since I'm a student and can't afford a new vehicle or getting bent over by the shops.
__________________
2006 Ranger 3.0 170,000 miles. Stock
Reply With Quote
  #2  
Old 06-02-2014, 08:44 AM
Prages Prages is offline
Ford Ranger Driver
 
Join Date: Nov 2012
Posts: 1,574
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Flashing CEL means major misfire that could be causing damage to the catalytic converter.

I hate to say it, but the only time I've ever had my CEL flash was when I had 2 burnt exhaust valves on my 3.0. Pretty much the same symptoms you're having. Rough idle, no power at all, and you could hear it backfire when you were going downhill using the engine to hold it back.

I dumped in a crate motor, but probably could have gotten by with just a head job.
__________________
2000 Ford Ranger XLT
Extended Cab
3.0 Flex
4x4
Manual Transmission
Offroad Package
Reply With Quote
  #3  
Old 06-02-2014, 09:01 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default

Quote:
Originally Posted by Prages View Post
Flashing CEL means major misfire that could be causing damage to the catalytic converter.

I hate to say it, but the only time I've ever had my CEL flash was when I had 2 burnt exhaust valves on my 3.0. Pretty much the same symptoms you're having. Rough idle, no power at all, and you could hear it backfire when you were going downhill using the engine to hold it back.

I dumped in a crate motor, but probably could have gotten by with just a head job.
I thought the same thing but he has newer heads from Ford? My 3.0 had a burnt #4 EV. Could Ford have screwed up twice?
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #4  
Old 06-02-2014, 06:04 PM
ckvl85 ckvl85 is offline
Learning to use the forums
 
Join Date: Jun 2014
Posts: 4
Default

Thanks guys... I did a compression check though and that's fine. That eliminates it from being the heads and valves right?
__________________
2006 Ranger 3.0 170,000 miles. Stock
Reply With Quote
  #5  
Old 06-02-2014, 06:44 PM
loots06 loots06 is offline
Like the Forums
 
Join Date: May 2014
Posts: 41
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Quote:
Originally Posted by ckvl85 View Post
Thanks guys... I did a compression check though and that's fine. That eliminates it from being the heads and valves right?
I'm having the same issue and I just bought the truck!! I did everything you did. The compression test for me did not check out the first time. Why, I don't know but it came up the second time and the leak down test confirmed a burnt valve in #6. Sucks for me considering I just bought the truck 3 weeks prior and only driven about 500 miles. For far 11K for the truck plus parts, heads will be on order and shop time.

Hope you have better luck! This is what I'm going with!

Premium Kit fits Ford Ranger Pickup Trucks from 2000 to 2008 with the 3.0L (183) V6 OHV 12-Valve "Vulcan" Engine

Kit Includes:
•2 - Remanufactured Cylinder Heads ( Upgraded withTungsten Caroffere Alloy Exhaust Seats )
•1 - New Head Bolt Set
•1 - New Cylinder Head Gasket Set

Cylinder Head Specifics:

Head are Totally Rebuilt from Premium Castings, and have been Upgraded with Tungsten Caroffere Alloy Exhaust Valve Seats to eliminate the exhaust valve seat recession problems common to the Ranger trucks. All components have been thouroughly cleaned, inspected, and replaced where necessary. All heads are machined in our facility using State-of-the-Art equipment and procedures. All heads are assembled with High-Temp Viton valve stem seals and thoroughly tested to ensure optimun operation of all components. Heads are completely assembled and ready to bolt on.

Warranty:

Heads are warranted for a periord of 12-Months with Unlimited Mileage. For our complete warranty statement, please see our website at: DoverUSA.com

Heads are sold outright - No Core Charge or Returns to Hassle With!
We have many kits in stock & ready for shipping!
Price Includes Free UPS Ground Shippingin the Continental United States (Lower 48 States Only).
*** Note: Customers in Georgia will pay an additional 7% Sales Tax.
*** If you haveTax-Exempt Status or a Resale Certificate, Please call us to make arrangements.

Other engine applications & parts are also available - give us a call with all of your cylinder head & engine parts needs!

For other delivery, pick-up or payment options, please call us at: 404.768.1825 or 800.541.1767

Click to View : All of our items

Business Hours
Monday thru Friday: 8:00am - 5:30pm
Saturday: 8:00am - 2:00pm

Dover Cylinder Head Inc
2539 Sullivan Road
College Park (Atlanta), GA 30337


Read more: http://www.dragtimes.com/parts/Ford-...#ixzz33JOEpvaL

Last edited by loots06; 06-02-2014 at 06:47 PM.
Reply With Quote
  #6  
Old 06-03-2014, 12:23 AM
ckvl85 ckvl85 is offline
Learning to use the forums
 
Join Date: Jun 2014
Posts: 4
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Quote:
Originally Posted by loots06 View Post
I'm having the same issue and I just bought the truck!! I did everything you did. The compression test for me did not check out the first time. Why, I don't know but it came up the second time and the leak down test confirmed a burnt valve in #6. Sucks for me considering I just bought the truck 3 weeks prior and only driven about 500 miles. For far 11K for the truck plus parts, heads will be on order and shop time.

Hope you have better luck! This is what I'm going with!

Premium Kit fits Ford Ranger Pickup Trucks from 2000 to 2008 with the 3.0L (183) V6 OHV 12-Valve "Vulcan" Engine

Kit Includes:
•2 - Remanufactured Cylinder Heads ( Upgraded withTungsten Caroffere Alloy Exhaust Seats )
•1 - New Head Bolt Set
•1 - New Cylinder Head Gasket Set

Cylinder Head Specifics:

Head are Totally Rebuilt from Premium Castings, and have been Upgraded with Tungsten Caroffere Alloy Exhaust Valve Seats to eliminate the exhaust valve seat recession problems common to the Ranger trucks. All components have been thouroughly cleaned, inspected, and replaced where necessary. All heads are machined in our facility using State-of-the-Art equipment and procedures. All heads are assembled with High-Temp Viton valve stem seals and thoroughly tested to ensure optimun operation of all components. Heads are completely assembled and ready to bolt on.

Warranty:

Heads are warranted for a periord of 12-Months with Unlimited Mileage. For our complete warranty statement, please see our website at: DoverUSA.com

Heads are sold outright - No Core Charge or Returns to Hassle With!
We have many kits in stock & ready for shipping!
Price Includes Free UPS Ground Shippingin the Continental United States (Lower 48 States Only).
*** Note: Customers in Georgia will pay an additional 7% Sales Tax.
*** If you haveTax-Exempt Status or a Resale Certificate, Please call us to make arrangements.

Other engine applications & parts are also available - give us a call with all of your cylinder head & engine parts needs!

For other delivery, pick-up or payment options, please call us at: 404.768.1825 or 800.541.1767

Click to View : All of our items

Business Hours
Monday thru Friday: 8:00am - 5:30pm
Saturday: 8:00am - 2:00pm

Dover Cylinder Head Inc
2539 Sullivan Road
College Park (Atlanta), GA 30337


Read more: http://www.dragtimes.com/parts/Ford-...#ixzz33JOEpvaL
thanks for the info! How much did you end up having to pay for the kit? are you installing yourself?
__________________
2006 Ranger 3.0 170,000 miles. Stock
Reply With Quote
  #7  
Old 06-03-2014, 04:52 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default

Quote:
Originally Posted by ckvl85 View Post
Thanks guys... I did a compression check though and that's fine. That eliminates it from being the heads and valves right?
I will try to help. Let's see what happens. These forums are about details. What were the actual psi #'s from the tests? Where they dry? Wet?

Fyi. I bought heads from that company a month ago and put them on my truck.
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #8  
Old 06-03-2014, 05:21 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

I don't know what this drag times is all about. I just bought the heads directly from dover cylinder heads, Sullivan Rd. Atlanta GA. I paid $280 delivered for 2 heads. There was a $100 gore charge. I bought bolts, tstat and a gasket set from rockauto for $100.
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #9  
Old 06-03-2014, 05:25 AM
gcextreme gcextreme is offline
Sept. TOTM
 
Join Date: Jul 2011
Posts: 12,240
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Quote:
Originally Posted by modelageek View Post
I don't know what this drag times is all about. I just bought the heads directly from dover cylinder heads, Sullivan Rd. Atlanta GA. I paid $280 delivered for 2 heads. There was a $100 gore charge. I bought bolts, tstat and a gasket set from rockauto for $100.
I hope u mean "core" charge...cuz there shouldnt be a "gore" charge lol
__________________
1999 Ranger 3.0FFV-ExtCab-4x4-My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK-My 98 Build

GC-EXTREME GRAPHICS
NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!

Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
Reply With Quote
  #10  
Old 06-03-2014, 05:32 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Quote:
Originally Posted by ckvl85 View Post
Hi everyone! I'm new to this forum but joined cause I need help! Here is what I have:
Check engine light on, really rough idle after coming to a stop with a cold motor, check engine light flashes when coasting down hill and after stopping at a light or stop sign. Pulled the codes and I have a misfire on startup and misfire on cylinder 6. Fuel trim is going lean.

here is what I've done:
replaced - Injector, spark plug, wires, PCV, Air filter, Cleaned MAF, Heads got redecked by ford a few years back.
check - compression= ok, voltage and resistance to injector = ok

Anyone have the same issue? or a clue why I am having issues? I keep throwing parts at it and am wrecking my brain on what it could be causing these problems. I'm due for smog and registration so I'm stressin about that since I'm a student and can't afford a new vehicle or getting bent over by the shops.
I think Ford installs their regular heads. some Aftermarket heads have hardened seats. I am learning that the issue is caused by the ranger CAT's. That is why the Taurus is mostly immune.i think you need new heads.

----------

Quote:
Originally Posted by gcextreme View Post
I hope u mean "core" charge...cuz there shouldnt be a "gore" charge lol
I Saw That And lol. I was going to change it but thought it was funny. It is a gore charge!
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #11  
Old 06-03-2014, 07:48 AM
loots06 loots06 is offline
Like the Forums
 
Join Date: May 2014
Posts: 41
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Quote:
Originally Posted by ckvl85 View Post
thanks for the info! How much did you end up having to pay for the kit? are you installing yourself?
$468 shipped to my door, no cores. Its at the shop, but the swap doesn't look to difficult with simple hand tools.

Quote:
Originally Posted by modelageek View Post
I will try to help. Let's see what happens. These forums are about details. What were the actual psi #'s from the tests? Where they dry? Wet?

Fyi. I bought heads from that company a month ago and put them on my truck.
This^^

Quote:
Originally Posted by modelageek View Post
I don't know what this drag times is all about. I just bought the heads directly from dover cylinder heads, Sullivan Rd. Atlanta GA. I paid $280 delivered for 2 heads. There was a $100 gore charge. I bought bolts, tstat and a gasket set from rockauto for $100.
Same company, same number, I'll ask about the core when I order mine. I may get some cash back.

Last edited by loots06; 06-03-2014 at 07:50 AM.
Reply With Quote
  #12  
Old 06-03-2014, 08:01 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Quote:
Originally Posted by loots06 View Post
$468 shipped to my door, no cores. Its at the shop, but the swap doesn't look to difficult with simple hand tools.



This^^



Same company, same number, I'll ask about the core when I order mine. I may get some cash back.
I paid an indy guy I use to do mine. He charged me $500 but I gave him $600. I stopped by a few times to check it out. It's a lot of work. He broke some exhaust studs and some were stuck in the head. FORD HOSED ME FOR $90 FOR THE STUDS. I think you need a torn 50 for the intake. If your belt and are old replace them. I had just replaced mine.
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #13  
Old 06-03-2014, 09:06 AM
Prages Prages is offline
Ford Ranger Driver
 
Join Date: Nov 2012
Posts: 1,574
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

I had broken exhaust studs on my old motor, but I just went to the same local place where I bought the crate motor and bought a new set of studs for about $5.

As for the amount of work, yeah, you'd have to pull all the wiring harnesses and vacuum hoses, remove the valve covers, upper and lower intake, and the exhaust manifolds. There's probably a bolt or two in power steering bracket that goes into the head, though I'm not sure, since I did a complete motor swap and had all of that stuff off my old motor when I took the heads off to inspect them. There's also that pesky #3 push rod that actually runs through the lower intake manifold, so you have to remove the rocker and rod from #3 to remove the manifold, and also remove it from #3 on the new heads to put the lower manifold back on.
__________________
2000 Ford Ranger XLT
Extended Cab
3.0 Flex
4x4
Manual Transmission
Offroad Package
Reply With Quote
  #14  
Old 06-04-2014, 02:05 AM
ckvl85 ckvl85 is offline
Learning to use the forums
 
Join Date: Jun 2014
Posts: 4
Default

Swapped the coil pack... That didn't work either. Gonna run it on the scanner... See what I find. Any ideas of what to look for? Gonna look at fuel trim... I wanna rule everything out before I buy any big parts or commit a ton of time to the job not knowing that's what it is for sure.
__________________
2006 Ranger 3.0 170,000 miles. Stock

Last edited by ckvl85; 06-04-2014 at 08:19 AM.
Reply With Quote
  #15  
Old 06-06-2014, 04:55 PM
idahoRedRanger idahoRedRanger is offline
Broke Car Enthusiast
 
Join Date: Oct 2013
Posts: 450
Default Re: 3.0 flashing check engine light and misfire on #6... HELP!

Not sure if it has been said yet or not, but it will probably be your plugs and wires. Had the same problem with my truck and it fixed it
Reply With Quote
Reply

Tags
3.0, check engine, misfire, misfire #6, rough idle

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Check engine light on and flashing once in awhile matheny00 3.0 Vulcan Tech 6 04-26-2022 07:17 AM
check engine light flashing ajw1275 3.0 Vulcan Tech 8 09-06-2012 09:17 AM
Check Engine Light Flashing Codes Help (VIDEO)?? ZohanisBack 4-Cylinder Tech 2 11-17-2011 05:56 AM
please help! flashing check engine light hrk003 4-Cylinder Tech 8 09-03-2011 06:26 PM
Flashing Check Engine Light Craig Novacek Exterior Tech 13 02-08-2011 07:56 AM