Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-24-2014, 10:51 AM
thedrd thedrd is offline
Learning to use the forums
 
Join Date: Jun 2013
Posts: 8
Question Will a 3.0L auto engine bolt onto my 5-speed trans??

I know probably old question you've all heard it 100 times but I'm a rookie with this Ford that's the reason for the rookie question I did try the search button don't worry didn't come up. I own a 1996 Ford Ranger 5-speed 4x4 with the 3.0L Vulcan engine the head gasket went the previous owner cooked the engine I picked it up cheap with 3" lift done bush bumpers clean body and interior good drivetrain newer clutch and so on. My question for you experts is can I bolt in the same Vulcan 3.0L but out of a 1999 auto Sable? I took a look at it last night 204xxx kms runs great owned by old lady trans is shot like usual selling it cheap. I know the bellhousing pattern is the same but anything else that I don't know to get it to bolt in? I can fabricate it in there if needed just need to know what, if anything, needs to be cut/moved/welded.
Thank you

Dave.
Reply With Quote
  #2  
Old 04-24-2014, 11:13 AM
littlelauricella littlelauricella is offline
Jimbo James
 
Join Date: Mar 2013
Posts: 83
Default

Quote:
Originally Posted by thedrd View Post
I know probably old question you've all heard it 100 times but I'm a rookie with this Ford that's the reason for the rookie question I did try the search button don't worry didn't come up. I own a 1996 Ford Ranger 5-speed 4x4 with the 3.0L Vulcan engine the head gasket went the previous owner cooked the engine I picked it up cheap with 3" lift done bush bumpers clean body and interior good drivetrain newer clutch and so on. My question for you experts is can I bolt in the same Vulcan 3.0L but out of a 1999 auto Sable? I took a look at it last night 204xxx kms runs great owned by old lady trans is shot like usual selling it cheap. I know the bellhousing pattern is the same but anything else that I don't know to get it to bolt in? I can fabricate it in there if needed just need to know what, if anything, needs to be cut/moved/welded. Thank you Dave.
How would you even begin to attach a front wheel drive sable engine to a rear wheel drive ranger transmission??
__________________
2008 Ranger XLT | 2.3L | 2WD | 5-Speed Manual | Flowmaster Exhaust | Aftermarket Fogs | AFE Cold Air Intake
Reply With Quote
  #3  
Old 04-24-2014, 11:14 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default

Quote:
Originally Posted by thedrd View Post
I know probably old question you've all heard it 100 times but I'm a rookie with this Ford that's the reason for the rookie question I did try the search button don't worry didn't come up. I own a 1996 Ford Ranger 5-speed 4x4 with the 3.0L Vulcan engine the head gasket went the previous owner cooked the engine I picked it up cheap with 3" lift done bush bumpers clean body and interior good drivetrain newer clutch and so on. My question for you experts is can I bolt in the same Vulcan 3.0L but out of a 1999 auto Sable? I took a look at it last night 204xxx kms runs great owned by old lady trans is shot like usual selling it cheap. I know the bellhousing pattern is the same but anything else that I don't know to get it to bolt in? I can fabricate it in there if needed just need to know what, if anything, needs to be cut/moved/welded.
Thank you

Dave.
I think you can but you need to pull the heads and install ranger headgaskets. There is a thread around about it.

----------

Quote:
Originally Posted by littlelauricella View Post

How would you even begin to attach a front wheel drive sable engine to a rear wheel drive ranger transmission??
Its the same engine. It will bolt up.
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #4  
Old 04-24-2014, 11:38 AM
thedrd thedrd is offline
Learning to use the forums
 
Join Date: Jun 2013
Posts: 8
Default Re: Will a 3.0L auto engine bolt onto my 5-speed trans??

Quote:
Originally Posted by littlelauricella View Post
How would you even begin to attach a front wheel drive sable engine to a rear wheel drive ranger transmission??
It is the same engine just turned 90. Why even post in my thread I'm looking for information not to answer your questions..

----------

Quote:
Originally Posted by modelageek View Post
I think you can but you need to pull the heads and install ranger headgaskets. There is a thread around about it.

----------



Its the same engine. It will bolt up.
I looked for it no luck I'll search it again. Thanks mofelageek if you see it can you copy paste the link for me?
Reply With Quote
  #5  
Old 04-24-2014, 11:53 AM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,268
Default

I think you also have to swap pickup tubes and oil pans, serp belt setup sensors, etc. In the end it might be easier to just pull the heads from the 96 have them cleaned up and reinstall.
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #6  
Old 04-24-2014, 01:34 PM
thedrd thedrd is offline
Learning to use the forums
 
Join Date: Jun 2013
Posts: 8
Default Re: Will a 3.0L auto engine bolt onto my 5-speed trans??

Quote:
Originally Posted by modelageek View Post
I think you also have to swap pickup tubes and oil pans, serp belt setup sensors, etc. In the end it might be easier to just pull the heads from the 96 have them cleaned up and reinstall.
I've ditched the engine since pulled striped it kept accessories but not the heads.. Well my dad ditched the engine but yeah that isn't an option for me
Reply With Quote
Reply

Tags
3.0, 5-speed, auto, sable, vulcan

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: running 5.0 + Auto Trans + Engine wiring harness + computer thebatman Engine & Drivetrain Parts 1 02-14-2014 04:04 AM
Will a 99 3.0 man trans bolt to a 93 3.0 cattrell79 Drivetrain Tech 0 10-07-2013 03:41 PM
Auto trans to 5 speed 00.Ranger.XLT Drivetrain Tech 5 08-06-2012 07:27 PM
For Trade: 2004 M5OD 5-speed trans for a 5R55E Automatic trans Fordfan444 Engine & Drivetrain Parts 10 12-03-2011 04:43 AM
5 Speed Auto. Trans. (2003) Gil Drivetrain Tech 1 09-05-2011 06:59 AM