Do I have a deal for you.. If you've ever wanted to swap out to better brakes with more surface area for braking, you'll want to start here and know what you're getting too. It will also lend you an opportunity to do a BIG Brake kit if you have some fab skills or at least someone in your networking that can fab for you. See:
Sport Trac 12-Inch Rotor Upgrade For 2WD Ford Ranger
I have a pair of 95-97 steering knuckles & caliper brackets I am willing to part with and willing to negotiate a good deal. My cut and turned beams are coming back with Dana44 knuckles so I cant use these now on my 4x4 frame swap.
This is what I started with /
95-97 Steering Knuckles
This is what you would be receiving /
"Refreshed" 95-97 Steering Knuckles [NO, the snorkel kit isn't included, sorry]
Also Parts Included:
All New in boxes
- Timken inner/outer bearings
- National Seals
The lower/upper ball joints [
NOT INCLUDED] are the same as your 2WD from 93-97, 2WD Lower
MOOG K8561T , 2WD Upper
MOOG K8560T which I am including the info here for you as you may as well do it to the 9's while your in there and just make it a clean swap of R&R the knuckles.
You will need to get a set of 95-97 Dual-Piston Calipers to complete this. Had I went with the "Extra Mile" versions below, both of us would have spent money but I'd likely lose some more than you, the new owner would.
For the budget conscious
POWER STOP L4606A
POWER STOP L4607A
For those looking to go above the extra mile
POWER STOP S4606A x 2
You will have to accommodate your brake rotors to whether or not you have or DON'T have ABS -
Rotor Options
I'm asking only for what I put into the knuckles which I hear are getting rare, and the media blasting.. considering I also pulled the parts and did all the running around, and I've already shopped and included quality bearings and seals for you too ($34 value), again my loss.
-- $215 +shipping is my asking price. Reasonable offers accepted.
I will find the least expensive means to ship them in the most reasonable time but best care possible.
I will ALSO press out old ball-joints to make it easier for you as well save some weight in shipping!