The 3/4 drop is fine as long as that's it . I'm guessing your going djm beams and flip out back . If so you should be good . I started with that kit . I've cut coils and did a expo rear swap . Which for the rear would be a better route to go I feel after ending up with one on mine . I did the flip but wanted disk and posi . So I swapped axles and leafs for expo stuff . You can stiffness back with the expo leafs ( 4vs3) . Mines set up at a 4.5 front and 6.5-7" drop now . Thats with flipping shackles out back and tweaking the mount brackets and cutting dead coil and a half . On 15's with low pros when I got tires lol it drops it down another 1.5 - 2 " that's going from 16"s .my wheel combos very from street to drift but have been know to roll the drift setup on the street from time to time , Which is a 205/50/15 . Street is a 235/60/16


Sent from my iPhone using Tapatalk

__________________
87 rx7 street port w/holset hx52 turbo
2008 tbss 6.0 ls2 cam'd
94 xcab 5.0 swap in progress