View Single Post
 
Old 12-28-2016, 03:24 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 619
Default Re: How To: Remote Start

I finished the door locks yesterday which was an absolute bitch.
Here's the door boot which is very hard to work with:


Here's the access hole to the door boot where you'll have to feed the wires to/from:


Sent from my SM-N910V using Tapatalk

----------

I finished the door locks yesterday which was an absolute bitch.
Here's the door boot which is very hard to work with:


Here's the access hole to the door boot where you'll have to feed the wires to/from:


In the door boot there will be two wires of interest.

PINK/YELLOW goes to the GREEN Door Lock wire of the 3-pin connector.
PINK/GREEN goes to the BLUE Door Unlock wire of the 3-pin connector.
*The Avital Key fob Lock/Unlock buttons will now be able to function while the vehicle is remote started. The doors will also lock/unlock at the same time (ONE press) instead of the driver-then-passenger (2 press) way with the OEM remote.

Sent from my SM-N910V using Tapatalk


Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote