|
02-21-2012, 01:24 PM
|
Learning to use the forums
|
|
Join Date: Feb 2012
Posts: 6
|
|
Truck won't start, just makes clicking noise.
Usually dead battery or starter but I had both tested and they are fine, so I replaced the starter solenoid, still nothing. What else could it possibly be?
87 Ranger 2.9L V6
|
Register and never see these ads again. |
|
02-21-2012, 04:09 PM
|
Ford Ranger Driver
|
|
Join Date: Nov 2011
Posts: 1,965
|
|
Re: Truck won't start, just makes clicking noise.
Take a close look at your cables, also does everthing else work like it should, when you try to start it do the lights dim?
|
02-21-2012, 04:11 PM
|
|
Ford Ranger Driver
|
|
Join Date: Apr 2011
Posts: 1,720
|
|
Re: Truck won't start, just makes clicking noise.
spray some WD40 on the terminals and clean them and it should work, if not replace the positive cable
__________________
2003 Ranger Edge ... crashed
2011 sport 4x4 with a little modification
|
02-24-2012, 08:11 AM
|
Learning to use the forums
|
|
Join Date: Feb 2012
Posts: 6
|
|
Re: Truck won't start, just makes clicking noise.
Thanks for the reply's. No the lights do not dim at all when turning the key and all the lights and radio and everything works just fine. I just got the truck so I can't say for sure but the battery looks brand new I guess spraying some WD40 on it wouldn't hurt but there is no corrosion or anything. One problem may be that it has one of those cheap replacement posts on the negative cable. It seems like it is stable and getting a good connection but who knows. The grounds seem ok as well but I am not sure where the ground that runs directly to the engine block is, does anyone know?
|
02-24-2012, 08:16 AM
|
|
Blinded by the light
|
|
Join Date: Sep 2009
Posts: 7,674
|
|
Re: Truck won't start, just makes clicking noise.
I agree this is most likely a problem with one of the cables. The relay on the fender is clicking? You can use a screw driver to jump the two large terminals together and see if it cranks.
|
02-25-2012, 12:04 PM
|
Learning to use the forums
|
|
Join Date: Feb 2012
Posts: 6
|
|
Re: Truck won't start, just makes clicking noise.
yep the cable was just loose on the end connecting to the starter.... man I wasted a lot of time on that thanks everyone
|
02-25-2012, 12:35 PM
|
|
Learning to use the forums
|
|
Join Date: Feb 2012
Posts: 12
|
|
Re: Truck won't start, just makes clicking noise.
we have 2 starter soleniod on the truck one on the starter its self and one on the driver fender
|
02-25-2012, 02:28 PM
|
|
Blinded by the light
|
|
Join Date: Sep 2009
Posts: 7,674
|
|
Quote:
Originally Posted by xminnis
yep the cable was just loose on the end connecting to the starter.... man I wasted a lot of time on that thanks everyone
|
Hah. I had to read this a few times. I though you said you were wasted and that's why. Which I am right now so no es un suprisa but gladd u got it workking.
[Sent with the FRF Android App. So people can hate me even when I'm not at my desk!]
|
02-25-2012, 03:14 PM
|
|
Its a Ranger Thing
|
|
Join Date: Jan 2010
Posts: 1,227
|
|
Re: Truck won't start, just makes clicking noise.
Hehe, ^^ that made me laugh
__________________
1991 ford ranger ext. cab 4x4. 3.73 l/s 8.8, 315/75-16 tires fenders cut, 1.5 inch lift. 4.0 OHV 5 speed manual trans
Quote:
Originally Posted by nicksranger01
10 cause its a sexy lifted old beast
|
Quote:
Originally Posted by robertmcclure
oh shit. popcorn?
|
build!
|
02-27-2012, 03:57 PM
|
Liking the Ford Ranger Forum
|
|
Join Date: Dec 2011
Posts: 29
|
|
Re: Truck won't start, just makes clicking noise.
mot of the time cables or connections would be the next step with those symptoms/ but glad you figured it out.
|
09-01-2013, 04:08 PM
|
Learning to use the forums
|
|
Join Date: Sep 2013
Posts: 1
|
|
Re: Truck won't start, just makes clicking noise.
I ran into the same issue today with my 1991 Ford Ranger. Just a loud clicking, the engine would not turn over.
I replaced the solenoid and tested the starter. Starter was fine, as was the solenoid. But, I had to go back under the truck and wiggle the wires leading into the starter to get the engine to turn over. Now it works again!
Is there any good long term solution to this?
-sheldon
|
09-01-2013, 04:34 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2011
Posts: 4,177
|
|
Re: Truck won't start, just makes clicking noise.
Quote:
Originally Posted by sheldonkreger
I ran into the same issue today with my 1991 Ford Ranger. Just a loud clicking, the engine would not turn over.
I replaced the solenoid and tested the starter. Starter was fine, as was the solenoid. But, I had to go back under the truck and wiggle the wires leading into the starter to get the engine to turn over. Now it works again!
Is there any good long term solution to this?
-sheldon
|
new wire and/or new connections, could need tightening
__________________
Not a F150 sellout? Click HERE
Quote:
Originally Posted by robertmcclure
adamantium tamponicus!
|
|
|
|