Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-31-2011, 03:44 PM
playaforiife playaforiife is offline
Learning to use the forums
 
Join Date: Nov 2009
Posts: 7
Default Cel wont flash codes anymore

My 1990 2.9 ranger has a cel light on.

The truck used to give me codes when i jumped the two wires together. Now when i jump the cel just stays lit. No flash

Other issues with truck is:

When cold start, will NOT fire without starter fluid, or gas in the intake. Once started for first time, and warmed, she will continue to fire with zero problems every time after. Until she cools again.

Under the truck, i can hear my new fuel pump in tank prime when key is turned on. But it doesn't stop. It is continually priming.

Have hunch, the cel problem and the priming is related.

Please help. = /

Thanks kindly for all words of wisdom.
Reply With Quote
  #2  
Old 04-01-2011, 05:44 AM
Psychopete Psychopete is offline
Psycho Pete
 
Join Date: Jun 2009
Posts: 1,489
Default Re: Cel wont flash codes anymore

The symptoms you describe have been associated with a bad computer, but it's not common for them to go bad. Pull the passenger side kick panel and check for signs of moisture that may have gotten to the computer - that seems to be a common issue when they are found to be bad. Hard to proove whether is the culprit, definitely spend some time checking grounds and looking at other possibilities.
Reply With Quote
  #3  
Old 04-01-2011, 11:21 AM
playaforiife playaforiife is offline
Learning to use the forums
 
Join Date: Nov 2009
Posts: 7
Default Re: Cel wont flash codes anymore

Yea, looked at computer yesterday. Looks dry as bone. Also swapped the eec relay with known working one, and same symptoms.

Its weird for me to think the computer is bad since she will still start and run.

Ill try just swapping with a good computer and see if that makes any difference this afternoon.

If you come up with any other ideas, please let me know. And ill touch back with what happens after testing computer later today.

Thanks!
Reply With Quote
  #4  
Old 04-01-2011, 03:26 PM
playaforiife playaforiife is offline
Learning to use the forums
 
Join Date: Nov 2009
Posts: 7
Default Re: Cel wont flash codes anymore

Well, changed computers, and does the same thing. Just doesnt want to give the codes. Driving me nuts.
Checked every ground i could see, and all look good. Weird that she will still start and run, but the diagnostics wont work.
Any ideas?
Reply With Quote
  #5  
Old 04-02-2011, 10:49 AM
playaforiife playaforiife is offline
Learning to use the forums
 
Join Date: Nov 2009
Posts: 7
Default Re: Cel wont flash codes anymore

Well shooooot!

Now my dads 90 ranger that i borrowed the computer from is doing the SAME thing since i tested his computer in my truck. So i need to buy him a NEW computer. And buy myself a NEW computer. But before installing in my truck, gotta figure out what is making this happen. AHHHH..
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
multiple CEL codes need help wangbungal 3.0 Vulcan Tech 2 02-10-2011 09:49 PM
93 Ranger doesn't heat anymore raymilosh General Tech 15 01-25-2011 08:24 AM
10 codes but no CEL? CornFedBeast 4.0 SOHC / 4.0 OHV Tech 8 01-15-2011 03:14 PM
I Can't Take It Anymore!!!!!!!!!!!!!!!!!!!! ranger5572 Off Topic 23 08-22-2010 05:59 PM