Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 09-15-2016, 04:42 PM
Bamawolf2004 Bamawolf2004 is offline
Learning to use the forums
 
Join Date: May 2016
Posts: 2
Default 93 ranger 4.0 computer problems

Hey y'all. My name is John and my 93 Ranger 4.0 2wd has been given me fits with my computer. I had changed it out
Once already about a year ago and just had to change it out again. I have an Actron Code Scanner for EEC-IV systems and it told me that my MAF sensor was bad. Installed a new one and it STILL said that my MAF sensor was bad. Tried to clear code but it just looped on me. Went to Pull A Part here in Birmingham and got a 4.0 computer out of a 91 Explorer and put in it. Now getting code for a DIS Ignition Module left side weak. Pulled wires to module and cleaned them including ground and now getting a 2222 code? Please help. Also truck seems to be running fine now with good pickup and no hesitation. Have these Rangers had computer problems a lot cause I went to 5 rangers 4.0 and all of them had their computers pulled as well? Thanks in advance.
__________________
1993 Ford Ranger XLT 4.0l A4LD
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Potential computer issues when lifting a 2011 Ranger? funinthesun Lifted Suspension 6 05-07-2015 08:05 PM
computer modding for 2002 ranger? Blade Smith General Ford Ranger Discussion 33 03-03-2014 06:19 PM
Looking For Computer - 1993 Ranger 2WD BeeTee Electrical Tech 1 07-06-2013 11:58 AM
Computer/ PCM Test? 97 Ranger 4cyl. 2.3 L RangerDanger27 4-Cylinder Tech 0 04-12-2012 08:14 PM
Want to Buy: 99 ranger 4.0ohv wiring harness and computer swap kmf219 Engine & Drivetrain Parts 0 03-26-2012 06:24 PM