Re: no power to inline fuel pump, when plugged into harness
ok, I have an update,
I found a ground wire that was not grounded. Upon testing wire and touching to ground, found that it made the fuel pump relay click. so I re grounded that, but still no fuel pump when key is on. and still lose power to pump, when i plug into harness.
I bypassed the relay and hard wired the pump on a switch, just to see if the new pump was working. which it is. found the test port on the fuel rail, bled off air and vvroom. it started in less than what seemed like 3 revolutions of the motor. idled kinda rough at first, but smoothed right out. a little stumble on acceleration, but hey, its been sitting for about 4 years.
So now its down to figuring out why i lose power at harness connection. Any ideas?
__________________
1987 Ranger 2.9 4x4. rebuilt motor, only 50k on it. Automatic, 3 inch body lift, 31x10.5x15 BF Goodrich tires. custom flame job, roll bar, kc lights.
|