 |
 |
 |
|
#1
05-07-2016, 08:44 PM
|
|||
|
|||
90 2.9 cranks, but no spark
Having issue's it will crank over but i am not getting any spark to distributor don't think I'm getting spark to the coil either I replace the starter solenoid and the ignition coil appears to have new cap and rotor button.. all spark plug wires are in good shape. Got any ideas??
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
06-17-2016, 06:52 PM
|
|||
|
|||
|
Re: 90 2.9 cranks, but no spark
Try your maps sensor
Sent from my N800 using Tapatalk
|
|
|
|
|
|
#4
07-05-2016, 11:05 AM
|
||||
|
||||
|
Have you checked ignition fuse.
__________________
Collierdog.
|
|
|
|
|
|
#5
07-06-2016, 02:12 PM
|
|||
|
|||
|
Re: 90 2.9 cranks, but no spark
Check the fuse, then for 12 volts and ground at the coil. My 2.9 (Cali version) has odd wiring from the factory. Are you in Kaliforniastan?
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ranger Cranks and cranks but wont start!! | Jsmitty92 | General Tech | 4 | 06-05-2014 06:40 PM |
| 94 Ranger Cranks but won't start and has no spark... | 94 DangerRanger | 4.0 SOHC / 4.0 OHV Tech | 11 | 03-30-2014 04:43 PM |
| cranks,getting spark and fuel won't start | biggary | 2.9 Liter Tech | 4 | 05-06-2013 02:19 PM |
| no spark coils are good as well as icm and crank position sensor. still no spark | RangerPurple | 4-Cylinder Tech | 12 | 11-26-2012 09:28 PM |
| 92 ranger 2.3L cranks but no run no spark no injector pulse | kartracerdad19 | 4-Cylinder Tech | 1 | 04-27-2012 02:36 PM |
|
|
 |
|
|
 |
 |
 |
