I will try those but something interesting happened today, I pulled into a parking lot and when I went back out to start it, it would not start. I have always had it shut off randomly and leave me coasting on the road and then it would take a long time to start again. Today it just wouldn't start after I got back to my truck after I turned it off. I tried and tried but no start just cranking so i reached under dash to the inertia switch and pulled UP on the grey tab (I dont have the red button type but the grey button type in this pic)
I figured pulling it up would break the circuit and pushing it is what would reset it but i felt it click when I pulled up on it and then I turned the key and it started and ran like a champ. I need the car to leave me stranded one more time to confirm that it is an inertia switch problem but I thought you had to push down on the button to reset it but does pulling or pushing on it reset it??? Also, the truck has always restarted after a half hour or so in the past without me touching the inertia switch so my question is, does the inertia switch have the ability to reset itself and that's what makes me be able to restart it after a while? Or is it still something else, and I just happened to touch the inertia switch reset button and got lucky when I turned the key and it started and it never had anything ever to do with the inertia switch? I hope you guys understand all that. I am not good at explaining things.