Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 05-19-2010, 09:11 AM
dseaver dseaver is offline
Learning to use the forums
Join Date: Feb 2010
Posts: 4
Default OBD1 Code Question

So everything on my truck seems to be fine for a while until recently. When I start going in 1st and occasionally when I shift to 2nd the truck jerks almost as if loosing all power and suddenly getting it back. It only does this occasionally and lately the check engine light came on. Went to a checker and ran the OBD1 test that came back with a DTC90 code. The only definition of the code that I get says "SERIES FUEL/AIR INJECTION CODES ON VEHICLES WITH DUAL OXYGEN SENSORS REFER TO THE LEFT OR FRONT SENSOR. EXCEPT: 1984-1988 3.8L ENGINES: RIGHT SENSOR" This was a stored code in the memory. Both other tests came back clean with no codes. Could this be the cause of my problem and if so or if not how do I fix this?
1988 XLT
Standard Cab
Reply With Quote
Old 05-20-2010, 11:19 AM
Psychopete Psychopete is offline
Psycho Pete
Join Date: Jun 2009
Posts: 1,489
Default Re: OBD1 Code Question

Run the codes yourself, the scanner is incorrect. It is not possible to get a 90 code. The system outputs codes with blinks/pulses, and a 0 cannot be described in this fashion.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
code p0760??? rangerwheelinmike Drivetrain Tech 8 01-16-2011 06:51 PM
Code reader 08xlt General Tech 4 03-26-2010 05:26 PM
cat code help 99nwranger 4.0 SOHC / 4.0 OHV Tech 5 03-15-2010 07:42 PM
Code po420 Nick 4-Cylinder Tech 7 01-04-2010 12:36 PM
94 Ranger 3.0 V6 OBD1 Code Reader Alboterf3rd Electrical Tech 4 08-29-2009 05:17 AM