i read on a forum somewere that you could put a 1" body lift in and copyed this info into aqdraft in my email.

Hardware-
-12 hockey pucks (1" by 3" 6oz is perfect .. AKA STD size)
-Torx .. T-55 & T-50 3/8's drive or half inch, depending on what you prefer.
-12 1 1/2" fender washer's
-8 1/2" washers
-10 standard nuts (If you use locking nuts, dont use loctite.. Destroys lockers.)
-8x M12x1.75x140mm
-2x M12x1.75x160mm
-Reuse 2 front .. OR M12x1.75x120mm

my question is does anyone know were to order just the "pucks" i have the harden bolts from fastenal but need to find a place to order the blocks to put in. i'm not inclined to use the hockey pucks kids play with if i'm gonna take the time to put this in i want to do it right the first time.
what could be used for the 1"spacer? someone told me to just get a peice of steel that thick? would that work?