View Single Post
 
Old 11-14-2013, 10:27 PM
pcityranger pcityranger is offline
Ford Ranger Driver
 
Join Date: Feb 2011
Posts: 1,206
Default Re: Clean inside the cluster

Quote:
This is the 112% accurate answer. And it's the only way to gain access to that part in order to clean it. 93-2012 basically.

93-03 trucks: takes a T15 or 5.5mm(????) to remove the 7 or so screws holding the clear lense to the gauge cluster.

04+ trucks: the clear lense actually just snaps into place with 6 or 7 plastic snaps. Once you have the cluster removed, it'll be pretty clear what needs done.

When cleaning it, be aware of what you're using. The lenses are very easy to scratch or put in swirls....use a terry cloth or microfiber with glass cleaner or interior detailer after blowing the dust out.
Ok thanks, I figured there was tabs that need to be pressed or something
__________________
2004 4.0 4x4 5spd xlt with 175k 4.10 axles, extended cab, cranked t-bars (not maxed), painted black interior, 32x11.5x15 bfg a/t and procomp steel rims
60/40 mod with a shorty console
Reply With Quote