Re: Hesitation when I accelerate
Hello All , New to posting , Been reading and enjoying looking and now that i have a ranger [87] I could use a little help. I am building a 87 STX ext cab 4x4 into a street legal yet VORRA legal off road rig, used to race a 78 full size Bronco in BITD & VORRA full stock class , Yes it was the Light blue one from Grants Pass . OR After racing for several years we started to upgrade to class 3 and then the 08 economy took a dump, no need to go further on that uh guys. anyway I sold some parts off the old bronco and got my current project. I am starting from scratch but I have some cool stuff from the Bronco I saved , IE Race seats, radios, Pumper , intercom , window nets etc, 17" Bilstein 9100 shocks , I just bought 100 ft of 125 wall 1 3/4 DOM for the cage , I promise I will post photos at it progress. Plans are simple starting with a 4" body lift [35/12.50/16 BFG Projects, Only raced once [SF 250] LOL, Full inside cage , engine cage, [V6] truck will have aprox. 12" rear & 10" front travel. At this time I have a bad flat spot/ hesitation on takeoff , truck sat for a couple years, and I just replaced Plugs, rotor , cap, wires, Looks like from previous post it could be TPS or ? any idea's Thanks Guys You rock, and God bless, Eldon @ Coats & Coats off road race team...
----------
Hello All , New to posting , Been reading and enjoying looking and now that i have a ranger [87] I could use a little help. I am building a 87 STX ext cab 4x4 into a street legal yet VORRA legal off road rig, used to race a 78 full size Bronco in BITD & VORRA full stock class , Yes it was the Light blue one from Grants Pass . OR After racing for several years we started to upgrade to class 3 and then the 08 economy took a dump, no need to go further on that uh guys. anyway I sold some parts off the old bronco and got my current project. I am starting from scratch but I have some cool stuff from the Bronco I saved , IE Race seats, radios, Pumper , intercom , window nets etc, 17" Bilstein 9100 shocks , I just bought 100 ft of 125 wall 1 3/4 DOM for the cage , I promise I will post photos at it progress. Plans are simple starting with a 4" body lift [35/12.50/16 BFG Projects, Only raced once [SF 250] LOL, Full inside cage , engine cage, [V6] truck will have aprox. 12" rear & 10" front travel. At this time I have a bad flat spot/ hesitation on takeoff , truck sat for a couple years, and I just replaced Plugs, rotor , cap, wires, Looks like from previous post it could be TPS or ? any idea's Thanks Guys You rock, and God bless, Eldon @ Coats & Coats off road race team...
|