View Single Post
 
Old 06-29-2010, 03:09 PM
XLT08 XLT08 is offline
Ford Rangers
 
Join Date: Feb 2010
Posts: 220
Default Brackets for Step Rails

I dug out my step-rails for the truck after noticing the rockers had some good scratches from goofing off in the gravel pits. I got one side on with minimal difficulty and then I hit a little snag.

I am pretty sure I have all of the mounting hardware, however, I think I am missing part of the bracket.

On one side, at the front, the bolts were fastened and protruding through a plate and I just had to slip the nut on the front bolt, line up the back and tighten it up.

On the passenger side, there was two holes, where it appeared the bolts belonged, but no way was there enough room to get a wrench or socket on the back of the nut to hold while I got it on. I don't believe that is how they intended them to be installed.

Is it possible someone could show me their passenger side bracket with and if possible, without the steprails on?

I hope this made sense.

Edit: If it didn't, heres pictures...

Driver Side


Passenger side

__________________
08 XLT 4.0 V6
Awaiting 3" Body Lift + 33/12.50 MTs

Last edited by XLT08; 06-29-2010 at 04:03 PM.
Reply With Quote