Quote:
Originally Posted by 4b316
I,m pretty sure the mounting holes are different,are they not?Most of the harness under the dash and engine bay would have to be used.You would have to also have to use the fuel tank or at least a high pressure pump for the FI.you would need to use the 2.5 exhaust or at least fab up O2 bungs or use a 93-94 tube header that has both the EGR and the O2 bungs.I don't think you would need the rear as the ABS is a separate system and the VSS is in the tranny and the system uses that..You might have to use the instrument cluster also as the harness uses that.
|
thanks for the input.
I do have the engine mounts from the 2001 and will install or adapt if needed, I also have the fuel pump from the 2001 and could install if needed, I dont have the exhaust from the 01. The rear from the 01 is gone too. I dont have the 01 instrument cluster.
----------
I dont have the 01 drive line, the 84 still running. thats for letting me know, i will look for the carrier bearing of an 01. as far as the lenght. Do I need to replace it ? thats what I'm getting from you're message or is just the bearing and that will be it ?
thanks again
----------
The 84 its an automatic
----------
I do have the computer from the 2001, along with the engine and dash wiring harness as well. if needed.