Quote:
Originally Posted by cygrads
I have a 2001 Ford Ranger Edge 3.0 V6 5 speed manual and it won't go into gear. I have replace the clutch, slave cylinder and master cylinder with not joy. We did bench bleed the line when we replaced the master so I think we've done everything right but it won't go into gear. I saw on another thread a similar problem and the owner said his mechanic replaced the safety master switch and that fixed it - is that possible?
|
idk the safety switch would keep it from going into gear
It might be something in the transmission it self or there is still air in the system
Try bleeding it again
__________________
95 Ranger XLT 4x2 2.3 I4 5 speed 206,000 *dead*
96 Ranger XLT 4x4 4.0 V6 5 speed 173,000 *alive*
D35 front, 8.8 rear, 3.73 gears, limited slip rear diff
|