Quote:
Originally Posted by GLH
Too little power won't burn up the voice coils, but a clipped signal from trying to push that too little power will.
----------
Y'all are using junk amps and turning the gains too much, sending a clipped signal.
----------
Finally ! Someone on here that knows what he is doing !
----------
That junk was wired all wrong and the subs were in a shared chamber so the 1 that was left bottomed out while it's voice coils were melting.
----------
No.
----------
NO ! 'Max' or 'peak' mean nothing ! Match RMS only, use a lowpass filter, use a subsonic filter if using a ported sub enclosure, and set the gains correctly.
|
Sorry but Hifonics isn't junk
__________________
96 Ford Ranger 2.3 - Loads of mods
03 DSG Mustang GT 5 spd- CAI, Flowmaster cat back, Sequential tail lights, 70mm T.B. 265/305
1992 GMC C1500 4.3 Long Bed 91K
|