Re: Need help diagnosing No Power Issue
Quote:
Originally Posted by LargoRanger00
I have a 2000 Ranger 2.5L Automatic. over the past 3 months i have had a starting problem, i though it with the battery, then the alternator, and last the starter. all of which i have replaced. The problem is that every now and then (mostly after work to go home) i put the key in and i get nothing, not even a click from the starter, yet when i disconnect the negative battery cable and bolt it back on it starts right up. Im thinking its just a dirty connector( hopefully). if someone knows anything please let me know its becoming a real pain.
|
You might consider replacing both battery cables and make sure that the area where the NEG. cable attaches to at the other end is free of rust,dirt,oil...The cables do break down over time and get corroded under the insulation...
__________________
2011 Ranger XLT 2x4,4.0 SOHC, 5 Speed Auto, 3.55 Rear. Oxford White.
Simplicity is the ultimate sophistication.
Torque it down till it breaks off, then back it off 1/4 turn.
|