OK, I`ll give you guys a little more detail on what i did. I do have a few pictures I took during my install. 1st things first, I Ran all the pre-outs under the center console to the rear of the cab, huge hassle but keeps it clean. then from each speaker location, i then ran a new speaker wire back to the amp. I made sure to keep all the Positive wires, and negative wires the same.
In the back i then Installed a Alpine Type S 5"x7" in each door.
and the front I went with these pionner speakers
http://www.pioneerelectronics.com/PU...neer/TS-D1720C, and installed the crossover underneath the door panel.
Im not to sure if there was something im missing