Re: Timing chain help
Quote:
Originally Posted by andrewp808
I will have someone helping me. Is it possible to do it without pulling the motor? If you think it's necessary I will. Should I be replacing anything else while its apart.
|
The motor has to be removed and there's a special tool to keep the cams from moving. The tensioners and guides should be replaced too.
This is the Cam service tool link...
http://www.autotoolworld.com/product...UjZQgodJmMA4A#
__________________
2011 Ranger XLT 2x4,4.0 SOHC, 5 Speed Auto, 3.55 Rear. Oxford White.
Simplicity is the ultimate sophistication.
Torque it down till it breaks off, then back it off 1/4 turn.
|